LMC6035IBPX

LMC6035IBPX Features

LMC6035IBPX General Description

The LMC6035/6 is an economical, low voltage op amp ca-pable of rail-to-rail output swing into loads of 600Ω.LMC6035 is available in a chip sized package (8-Bumpmicro SMD) using National’s micro SMD package technol-ogy. Both allow for single supply operation and are guaran-teed for 2.7V, 3V, 5V and 15V supply voltage. The 2.7 supplyvoltage corresponds to the End-of-Life voltage (0.9V/cell) forthreeNiCdorNiMHbatteriesinseries,makingtheLMC6035/6 well suited for portable and rechargeable sys-tems. It also features a well behaved decrease in its speci-fications at supply voltages below its guaranteed 2.7V op-eration. This provides a “comfort zone” for adequateoperation at voltages significantly below 2.7V. Its ultra lowinput currents (IIN) makes it well suited for low power activefilter application, because it allows the use of higher resistorvalues and lower capacitor values. In addition, the drivecapability of the LMC6035/6 gives these op amps a broadrange of applications for low voltage systems.

LMC6035IBPX Applications

n Filtersn High Impedance Buffer or Preamplifiern Battery Powered Electronicsn Medical Instrumentation

LMC6035IBPX Features

(Typical Unless Otherwise Noted)n LMC6035 in micro SMD Packagen Guaranteed 2.7V, 3V, 5V and 15V Performancen Specified for 2 kΩ and 600Ω Loadsn Wide Operating Range:2.0V to 15.5Vn Ultra Low Input Current:20fAn Rail-to-Rail Output Swing@ 600Ω:200mV from either rail at 2.7V@ 100kΩ:5mV from either rail at 2.7Vn High Voltage Gain:126dBn Wide Input Common-Mode Voltage Range-0.1V to 2.3V at VS = 2.7Vn Low Distortion:0.01% at 10kHzn LMC6035 Dual LMC6036 Quadn See AN-1112 for micro SMD considerations

LMC6035IBPX General Description

The LMC6035/6 is an economical, low voltage op amp ca-pable of rail-to-rail output swing into loads of 600Ω.LMC6035 is available in a chip sized package (8-Bumpmicro SMD) using National’s micro SMD package technol-ogy. Both allow for single supply operation and are guaran-teed for 2.7V, 3V, 5V and 15V supply voltage. The 2.7 supplyvoltage corresponds to the End-of-Life voltage (0.9V/cell) forthreeNiCdorNiMHbatteriesinseries,makingtheLMC6035/6 well suited for portable and rechargeable sys-tems. It also features a well behaved decrease in its speci-fications at supply voltages below its guaranteed 2.7V op-eration. This provides a “comfort zone” for adequateoperation at voltages significantly below 2.7V. Its ultra lowinput currents (IIN) makes it well suited for low power activefilter application, because it allows the use of higher resistorvalues and lower capacitor values. In addition, the drivecapability of the LMC6035/6 gives these op amps a broadrange of applications for low voltage systems.

LMC6035IBPX Applications

n Filtersn High Impedance Buffer or Preamplifiern Battery Powered Electronicsn Medical Instrumentation