SI50X-FPB1-CUST

SI50X-FPB1-CUST Features

The Silicon Laboratories Si50x-FPB1-CUST kit containsfieldthe hardware and software neededprogramming the Si501/2/3/4 Singe/Dual/Quad/Any-Frequencyprogrammable CMEMS®(CMOS + MEMS) oscillators. The Field ProgrammerBoard (FPB) can be run on a USB-equipped PC.single-wirefor Field programming of Silicon Laboratories' Si501/2/3/4 CMEMS oscillators Windows-compatible software control and deviceprogramming

SI50X-FPB1-CUST Description

SI50X-FPB1-CUST 2. Introduction

This Si50x-FPB1 User’s Guide documents immediately useful information for programming blank devices (DUTs)and additional reference details in support of the Si50x-FPB1(FPB). This document also describes the operationof the Silicon Laboratories Si50x-FPB1 field programmer kit. The Si50x-FPB1 kit refers to the field programmerboard hardware and software intended for field programming of the Si501, 502, 503, and 504 CMEMS oscillators.The term, “field programming” as it is used in this document refers to writing the write-once configuration registers in Non-VolatileMemory (NVM). The NVM controls the configuration of the device on powerup.2.1. Kit ContentsThe Si50x-FPB1 kit contains the following:Si50x Field Programmer BoardUSB Type B retractable cable5 blank 2025 parts5 blank 2532 parts5 blank 3250 partsNote: The FPB GUI must be downloaded from www.silabs.com/Si50x-FPB1. It is not included in the FPB Kit.The software components run on a USB-equipped PC and are described in detail in Section “11. Software Guide”The Si50x-FPB1 field programmer board can be used to program one Si50x CMEMS oscillator at a time wheninstalled in 1 of 4 differently sized sockets.2Rev. 0.3