DA9062-A0AMC

DA9062-A0AMC Key Features

Input voltage 2.8 V to 5.5 V■■ Four buck converters with dynamic voltage■ Programmable power mode sequencer■ System supply and junction temperaturecontrol:□ Buck1: 0.3 V to 1.57 V, 2.5 A□ Buck2: 0.3 V to 1.57 V, 2.5 A(can be used in dual-phase configurationwith Buck1)□ Buck3: 0.8 V to 3.34 V, 2 A□ Buck4: 0.53 V to 1.8 V, 1.5 A(can be used as DDR VTT supply)■ 3 MHz switching frequency(enables low profile inductors)■ Four LDO regulators:□ LDO1: 0.9 V to 3.6 V, 100 mA□ LDO2, LDO3, LDO4: 0.9 V to 3.6 V,300 mA

DA9062-A0AMC General Description

DA9062 is a power management integrated circuit (PMIC) optimized for supplying systems withsingle- and dual-core processors, I/O, DDR memory, and peripherals. It targets mobile devices,medical equipment, IVI systems, and FPGA based applications.DA9062 features four buck converters providing a total current of 8.5 A. High efficiency is achievedover a wide load range with PFM mode available for low power or sleep modes. All power switchesare integrated, therefore, external Schottky diodes are not required. Furthermore, low-profileinductors can be used with DA9062. Two of the buck converters can be used in a dual-phaseconfiguration, and one can be used as a DDR VTT supply. The four LDO regulators withprogrammable output voltage provide up to 300 mA.Dynamic voltage control (DVC) allows dynamic control of DA9062 supply voltages according to theoperating point of the system. It is controlled by writing directly to the registers using the I2Ccompatible 2-wire interface or the GPIOs.DA9062 features a programmable power sequencer that handles start-up and shutdown sequences.Power mode transitions can be triggered with software control, GPIOs, or with the on-key. Severaltypes of on-key presses can be detected to trigger different power mode transitions.The real-time clock (RTC), with an external 32 kHz crystal oscillator, provides time keeping and alarmfunctions. Additionally, the integrated watchdog timer monitors the system.Five GPIOs are able to perform system functions, including: keypad supervision, application wakeup,and timing-controlled external regulators/power switches or other ICs.DA9062 is also available as an automotive AEC-Q100 Grade 2 version.

DA9062-A0AMC PMIC for Applications Requiring up to 8.5 A

DA9062-A0AMC PMIC for Applications Requiring up to 8.5 A