NX3L1G66GW-Q100H

NX3L1G66GW-Q100H 2. Features and benefits

 Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from 40 C to +85 C and from 40 C to +125 C Wide supply voltage range from 1.4 V to 4.3 V Very low ON resistance (peak): 1.6  (typical) at VCC = 1.4 V 1.0  (typical) at VCC = 1.65 V 0.55  (typical) at VCC = 2.3 V 0.50  (typical) at VCC = 2.7 V 0.50  (typical) at VCC = 4.3 V High noise immunity ESD protection: MIL-STD-883, method 3015 Class 3A exceeds 7500 V HBM JESD22-A114F Class 3A exceeds 7500 V MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 ) CDM AEC-Q100-011 revision B exceeds 1000 V IEC61000-4-2 contact discharge exceeds 4000 V for switch ports CMOS low-power consumption Latch-up performance exceeds 100 mA per JESD 78 Class II Level A Direct interface with TTL levels at 3.0 V Control input accepts voltages above supply voltage High current handling capability (350 mA continuous current under 3.3 V supply)

NX3L1G66GW-Q100H 1. General description

The NX3L1G66-Q100 is a low-ohmic single-pole single-throw analog switch. It has twoinput/output terminals (Y and Z) and an active HIGH enable input pin (E). When E is LOW,the analog switch is turned off.Schmitt trigger action at the enable input (E) makes the circuit tolerant to slower input riseand fall times. The NX3L1G66-Q100 allows signals with amplitude up to VCC to betransmitted from Y to Z; or from Z to Y. Its low ON resistance (0.5 ) and flatness (0.13 )ensures minimal attenuation and distortion of transmitted signals.This product has been qualified to the Automotive Electronics Council (AEC) standardQ100 (Grade 1) and is suitable for use in automotive applications.

NX3L1G66GW-Q100H 3. Applications

 Cell phone PDA Portable media player

NX3L1G66GW-Q100H 7.2 Pin description