RN25E-I/RM

RN25E-I/RM Features

• Bluetooth 2.1/2.0/1.2/1.1 and v2.0+EDR • Embedded SPP/DUN stack support, no host orprocessor stacks required • Small-form factor 24 Pin DIP package (0.1”pitch by 0.9” socket width) • Accepts 4Vdc to 24Vdc power (RN-24) • Hardware TTL, RS- 232 and RS-485 levels • RS-485 signaling with auto-direction control(RN25 only) • UART baud rate: 1200bps up to 921.6Kbps • 9 General Purpose Input/Output Pins (4masource/sink) controlled via remote commands • 2 Channel 8 Bit AD converter (5Hz, 0-1.8VDC ) • LEDs indicate connection and RX/TX status • On board antenna or external SMA jack • Low power consumption (30mA connected,,<10mA sniff mode) • Programmable over local UART and Bluetooth • Simple ACSII command interface • UART (SPP or HCI) and USB (HCI only) dataconnection interfaces • Sustained SPP data rates - 240Kbps (slave),300Kbps (master)

RN25E-I/RM Description

Industrial sensors and controlsThe RN24 transforms your product’s serialinterface into a wireless connection. The RN24 is aClass 1 Bluetooth radio with auto-connect andconnect on RX data features, enabling your productto transfer data up to 100M. The RN24 accepts awide range of unregulated DC power. The DIPpackaging with GPIO, UART interfaces and ADconverter makes it the perfect prototyping moduleand allows products to have optional Bluetoothcapability when the module is plugged in. • Embedded Bluetooth stack profiles included(requires no host stack): GAP, SDP, RFCOMMand L2CAP protocols, with SPP and DUN profilesupport.The RN-25 has the same powerful Bluetoothradio and simple ASCI command interface as theRN-24 but has a RS-485 hardware interface ratherthan RS-232.

RN25E-I/RM Applications

• Wireless RS232/RS485 cable replacement • Remote equipment monitoring • Scanners, GPS and measurement systems • • Medical devices