Image shown is a representation only. Exact specifications should be obtained from the product data sheet.
$11.35
Analog Devices Inc.
Analog Devices (NASDAQ: ADI) leads in crafting high-performance analog, mixed-signal, and digital signal processing integrated circuits. For decades, they've tackled signal processing challenges across global electronics. With over 100,000 clients, their products convert real-world phenomena into electrical signals. Merged with Maxim Integrated, they offer top-tier mixed-signal and power management technologies, solving complex problems from DC to 100 GHz and sensor to cloud.
Bostock Quality Assurance
LT3097ADJC#PBF FEATURES
► Ultra-low output RMS noise: 0.8 μV rms (10 Hz to 100 kHz)► Ultra-low output noise spectral density: 2 nV/√Hz (Positive) and2.2 nV/√Hz (Negative) at 10 kHz► Ultra-low 1/f noise: 10 µV p-p (Positive) and 3.2 µV p-p (Nega-tive) (0.1 Hz to 10 Hz)► Ultra-high PSRR: 76 dB (Positive) and 74 dB (Negative) at 1MHz► Output current: 500 mA► Wide input voltage range: ±1.8 V to ±20 V► Single capacitor per channel improves noise and PSRR► SET pin current: 100 µA, ±1% initial accuracy► Single resistor per channel programs output voltage► Programmable current limit► Low-dropout voltage: 260 mV (Positive) and 235 mV (Negative)► Output voltage range: 0 V to 15 V (Positive) and 0 V to –19.5 V(Negative)► Programmable power good► Fast start-up capability► Precision enable/undervoltage lockout (UVLO)► Internal current limit with foldback► Minimum output capacitor: 10 µF ceramic► Compact, low-profile, 22-lead, 6 mm × 3 mm, Plastic DFNpackage
LT3097ADJC#PBF GENERAL DESCRIPTION
The LT3097 is a dual, positive and negative, high-performance,low-dropout linear regulator featuring Analog Devices, Inc., ultra-low noise and ultra-high power supply rejection ratio (PSRR) archi-tecture for powering noise-sensitive applications. Each regulatordelivers up to 500 mA with a typical 260 mV/235 mV (positive/nega-tive) dropout voltage.Operating quiescent current is nominally 2.2 mA/2.35 mA (posi-tive/negative) and drops to 0.3 µA/3 µA (positive/negative) in shut-down. The LT3097 has a wide output voltage range (0 V to 15 V,positive and 0 V to -19.5 V, negative) error amplifier that operatesin unity-gain and provides virtually constant output noise, PSRR,bandwidth and load regulation, independent of the programmedoutput voltage.LT3097 is stable with a minimum 10 μF ceramic output capacitor foreach channel. Built-in protection includes internal current limit withfoldback and thermal limit with hysteresis. The positive regulatoralso includes reverse-battery protection and reverse-current protec-tion. The LT3097 is available in a thermally enhanced, 22-lead 6mm × 3 mm, Plastic dual-flat no-leads (DFN) package.Figure 2. PSRR vs. Frequency
LT3097ADJC#PBF APPLICATIONS
► Bipolar very low-noise power supplies► RF power supplies: phase-locked loops, voltage-controlled oscil-lators, mixers, low-noise amplifiers, and power amplifiers► Low-noise instrumentation► High-speed and high-precision data converters► Medical applications: imaging and diagnostics► Precision power supplies► Postregulator for switching supplies
Product Attributes
TYPE | DESCRIPTION | Select all |
---|---|---|
Current - Quiescent (Iq) | 101 µA | |
Package | Tube | |
Product Status | Active | |
Control Features | Current Limit, Enable, Soft Start | |
Output Configuration | Positive and Negative | |
Protection Features | Over Current, Over Temperature, Reverse Current, Reverse Polarity, Short Circuit, Under Voltage Lockout (UVLO) | |
Output Type | Adjustable | |
Operating Temperature | -40°C ~ 125°C (TJ) | |
Number of Regulators | 2 | |
Mounting Type | Surface Mount | |
Maximum Input Voltage | ±20V | |
Package / Case | 22-WFDFN Exposed Pad | |
Minimum/Fixed Output Voltage | 0V | |
Supplier Device Package | 22-DFN (6x3) | |
Maximum Voltage Dropout | 0.65V @ 200mA | |
Current - Output | 500mA, 500mA | |
Current - Supply (Max) | 102 µA |
$11.35
Analog Devices Inc.
Analog Devices (NASDAQ: ADI) leads in crafting high-performance analog, mixed-signal, and digital signal processing integrated circuits. For decades, they've tackled signal processing challenges across global electronics. With over 100,000 clients, their products convert real-world phenomena into electrical signals. Merged with Maxim Integrated, they offer top-tier mixed-signal and power management technologies, solving complex problems from DC to 100 GHz and sensor to cloud.